Stahl EC-710 series, Руководство по эксплуатации

Страница: 18 / 28

Operating Instructions EC-710-xxx Maintenance, service
Page 18 of 28

R. STAHL HMI Systems GmbH / OI_Camera_EC_710-xxx_en_V_02_00_11.docx / 08.09.2020
13 Maintenance, service
Associated equipment is subject to maintenance, service and testing
according to guidelines 1999/92/EC, IEC/EN 60079-14, -17, -19 and
BetrSichVer (Betriebssicherheitsverordnung - Occupational Safety
and Health) !
The colour cameras contain no replaceable parts. It is therefore not necessary to carry out regular
adjustments.
Maintenance should focus on the following:

damage to the lens glass

all cables and lines are properly connected and undamaged

housing damage
13.1.1 Servicing
It is the responsibility of the operator of an electrical plant in a hazardous environment to have the
plant serviced. Please also note the appropriate national rules and regulations.
14 Troubleshooting
Users cannot carry out any camera repairs.
In addition, the following applies:
Devices operated in hazardous areas must not be modified. Repairs
may only be carried out by qualified, authorized staff specially trained
for this purpose.
Repairs may only be carried out by specially trained staff who are
familiar with all basic conditions of the applicable user regulations and
– if requested – have been authorized by the manufacturer.
NOTICE
NOTICE