Mounting and Installation
24
253215 / 941960310090
2017-04-21·BA00·III·en·01
Bus-Carrier for linking device
Series 9419/0..-LD1-..E1
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
8.3.3 Connecting the Fieldbus Segment
Stripping the insulation from and connecting the fieldbus connection cable
Option 1: Connect the shielding to the shield bus
Observe the information regarding the correct earthing and shielding of
fieldbus installations in the document FF AG 181.
18082E00
18083E00
• Strip the insulation of the
connection cable (1) according
to the drawing.
• Turn down the bare shielding
(2) according to the drawing.
• Make sure that the cable
diameter with the shielding
turned down does not exceed
the dimensions indicated on the
drawing.
• Strip the insulation of the
conductors according to the
drawing.
• Make sure that the shielding or
the cores are not damaged
when stripping the insulation.
• Repeat the procedure for other
connection cables.
• Connect single cores of the
connection cable to the corre
-
sponding terminals "+" and "–"
of the fieldbus terminal.
• Clamp the connection cable
with shielding by means of a
shield terminal (available as an
accessory) on the shield bus.
• Repeat the procedure for other
connection cables.
1
2
21 [0,83]
1
2
5 ... 9
[0,19 ... 0,35]
12 [0,47]
14 [0,55]
7 [0,28]
