916260330020
2018-03-08·HB00·III·en·02
Safety notes
5
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Transmitter Supply Unit with Limit Values
Series 9162
2.3
Symbols on the device
3
Safety notes
3.1
Storage of the manual
• Read the manual carefully.
• Store the manual at the mounting location of the device.
• Observe applicable documents and operating instructions of the devices
to be connected.
3.2
Safe use
Before mounting
• Read and observe the safety notes in this manual!
• Ensure that the contents of this manual is fully understood by the personnel in charge.
• Use the device in accordance with its intended and approved purpose only.
• Always consult with R. STAHL Schaltgeräte GmbH if using the device under operating
conditions which are not covered by the technical data.
• Observe the document "Cabinet installation guide" for engineering (download from
www.stahl-ex.com, product documentation, subitem "Engineering").
• We cannot be held liable for damage caused by incorrect or unauthorized use of
the device or by non-compliance with this manual.
• Install the device in Zones 2, 22 or outside of hazardous areas.
• When used in Zones 2 or 22, the device must be built into an enclosure which
corresponds to the requirements of IEC/EN 60079-15 or IEC/EN 60079-31.
• Any damage may compromise the explosion protection.
Symbol
Meaning
05594E00
CE marking according to the current applicable directive.
02198E00
According to marking, electric circuit certified for hazardous areas.
15649E00
Input
15648E00
Output
Please refer to this documentation for safety information
