Mounting and installation
14
916260330020
2018-03-08·HB00·III·en·02
Transmitter Supply Unit with Limit Values
Series 9162
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Mounting
Dismounting
• Proceed in the reverse order to mounting.
8.2.2 Mounting / dismounting of the device on top hat rail and pac-Bus
Mounting on top hat rail
Mounting on pac-Bus
07392E00
• Connect the required number of pac-Bus elements.
07391E00
• Engage the pac-Bus elements on the top hat rail.
15551E00
• Connect the terminal set at the beginning and at the end.
06886E00
• Position the device on the top hat rail.
Position the cut-out of the enclosure on the outside
edge of the top hat rail.
• Engage the device on the top hat rail.
• When swivelling the device onto the top hat rail,
make sure that it is not set at an angle.
15554E00
The pac-Bus is equipped with a polarisation guide and
the device with a matching slot.
• Position the device as shown in the illustration.
Position the cut-out of the enclosure on the outside
edge of the top hat rail.
• Engage the device on the pac-Bus.
