Stageline SP218UXL, Описание

Страница: 32 / 44

SP218UXL-19“
32
5.2 Basic display – Merger modes H , L , h , n
Start address IN B
(call further displays)
5.3 Outputs with special behaviors
! All adjustments made here have an effect on the complete
SP218UXL and can be shown and adjusted in every mode.
Adjusting special behaviors:
Display: Splitter/Booster
Merger
M c b a M c b a
Pushing the button forces a flashing display. From now on the
respective setup can be changed with the button below the
segment. The new adjustment is saved by pressing the mode-
button for 1 second.
!
Without a further keystroke, within 5 seconds, the display stops
flashing and nothing was stored.
In Merger-Mode the upper display is shown after pushing the mode
button.
If an attitude isn't provided by a mode, the segment stays dark.
locking address
DMX512 Timing
Signal source for out 1/5
and number RETIMER output
1x 1x