Stageline SP218UXL, Описание

Страница: 28 / 44

SP218UXL-19“
28
3. Displays
Two green LED’s shows a valid DMX512 signal on input A and B.
- LED is off no input signal
- LED flashes DMX512 signal is checked
- LED is on DMX512 signal is correct
The 7-segment display represents the different modes. This
happens by numbers, letters and special signs. In combination with
this, the decimal point shows an extended function of a mode.
The another three 7-segment displays on the back serve for the
representation of the extended functions of the different modes and
for the petition of fundamental adjustments.
4. Mode selection
(red number = shown at single display)
The choice of a mode is made by the small, brown pushbutton
which is standing out of the front- & rear panel as far as necessary.
A short push shows the individual modes by a blinking sign in the 7-
segment display.
!
While blinking the shown mode is still inactive and if no button is
pressed within 5 seconds, the display returns to the previous mode.
But pressing the button for 2 seconds stores the chosen mode, the
display becomes dark and comes back with the new mode.
!
The outputs 1 and 5 may have a special configuration, see
chapter 5.3.1.
Because of the clarity and compatibility for the earlier instruction
manuals the new functions are described more precisely later in
chapter 5.
Splitter / Booster 1 8 oder 2x 1 4
4.1 one line - IN A or IN B into 8 Outputs
Automatic initial choice between input A or B as long as only one
Input has a DMX512 signal. With DMX512 at both inputs, input A
has priority. No output signal without any input signal.