32
1. SL100_User’s Manual_2017
8.13 Electric Hydraulic Power Unit
This unit can serve as an alternative power source or be used indoors where gas engines are
often forbidden.
• Turn the gas engine off.
• Plug the motor into an electrical power source. If necessary, use an extension cord of
12 AWG or larger.
• Turn the switch to the “On” position to start the motor.
• Power source voltage must be compatible with the motor.
If in doubt, consult a professional electrician.
8.14 Quick Connect System
This system will allow you to use an electrical power unit or to replace the gas hydraulic power unit installed on your Stageline SL 100 in
case of failure. A power unit not exceeding 1500 psi (103.42 bars) with a flow rate of 1 to 3 gpm per minute (4.6 to 13.6 liters) is required.
• Connections are located at the rear on the driver’s side,
behind the engine compartment.
• Turn the gas engine off.
• Plug in the power unit and connect it to the stage.
• Turn the power unit on and adjust pressure to a maximum o
f 1500 psi (103.42 bars).
Ensure the gas engine is turned off before connecting this system.
CAUTION
SL100
