1. SL100_User’s Manual_2018
21
7.2 stage maintenance records
7. maintenance documents
ITEM
SERVICE
INTERVAL
LUBRICANT DATE DATE DATE DATE
NOTES
Note:
The frequency of inspection for the trailer and stage components set by Stageline Mobile Stage inc. is a minimum safety requirement and does not prevail over
the laws and regulations of the country, state, province or town where it is operated.
Important:
Before and during each event, a visual structural inspection must be your priority. As steel tends to rust with time, all parts subjected to friction should
be sanded and repainted as necessary.
Aluminum
Structure
Axles
Suspension
Brake
Components
Electric
System
Hydraulic Lines
Hydraulic Filter
Hydraulic Fluid
Cylinders and
Hinges
Cylinder Rods
NLGi Grade 2
Lithium grease or
equivalent
NLGi Grade 2
Lithium grease or
equivalent
ATF oil
Dexron III or
equivalent
Inspect hubs, drums and
bearings annually or every
19,000 km. Replace grease.
Visual inspection of
structure and welded points
before each use. Thorough
annual inspection.
Test before each use. Adjust
after the first 1,500 km and
thereafter every 4,800 km.
General inspection after
each use for leaks, break-
age, cuts. Thorough annual
inspection.
Check before each use.
Thorough annual inspection.
Change annually. Synthetic
filter. 10 microns minimum.
Check for contamination
annually. Oil should be red &
clear. If necessary, flush
system and refill.
Grease annually or prior to a
long storage period.
Synthetic-based
lube with
silicone®
ATF oil
Wheels and
Tires
Check tire pressure
with each use.
Check and re-torque wheel
nuts after first 80 km
(120–140 lbs–ft.) and
periodicaly thereafter.
Visual inspection of wheel
nut indicators with each use.
Grease leaf spring ends
every 5,000 km.
Telescopic Roof
Columns
Clean annually.
Lubricate if necessary.
ATF oil
Lubricate before long period
of inaction.
It is recommanded to operate
and use all the hydraulics at
least once a month.
