DMX start address 1
DMX start address 6 = place values 4 + 2
DMX start address 104 = 64 + 32 + 8
The easiest way is always to start from the highest
possible place value and to add the smaller values
until the start address will result.
7.3 Control with LED-4C
The unit LED-4C by “img Stage Line” is an easy-to-use
controller specially designed for these LED spotlights.
It is equipped with 4 channels so that all spotlights con-
nected to it can only be controlled in sync.
Set the start address of the spotlights to 1 or to a
multiple of 4 + 1 (5, 9, 13, … 61 max.),
chapter 7.2.
Detailed information for operation can be found in the
manual of LED-4C.
8
Specifications
Power supply: . . . . . . . . 230 V~/50 Hz
Power consumption: . . . 20 VA
Illuminant
PARL-56PDX: . . . . . 156 extra bright 5 mm LEDs
red: 50, green: 53, blue: 53
PARL-64PDX: . . . . . 212 extra bright 5 mm LEDs
red: 70, green: 71, blue: 71
Beam angle: . . . . . . . . . 40°
Ambient temperature: . . 0 – 40 °C
Dimensions
PARL-56PDX: . . . . .
∅
190 mm × 185 mm
PARL-64PDX: . . . . .
∅
216 mm × 205 mm
Weight
PARL-56PDX: . . . . . 2.5 kg
PARL-64PDX: . . . . . 3 kg
Cable length: . . . . . . . . 1.2 m
8.1 DMX channels
Subject to technical modification.
DMX-value Function
Channel 1: proportion of red
0 – 255
brightness of red LEDs
Channel 2: proportion of green
0 – 255
brightness of green LEDs
Channel 3: proportion of blue
0 – 255
brightness of blue LEDs
Channel 4: dimmer/stroboscope/music
0 – 7
LEDs off
8 – 190
dimmer
191 – 200
music-controlled change of colour
via integrated microphone
201 – 247
stroboscopic effect: slow
→
fast
248 – 255
full brightness
←
Place value
←
Switch number
←
Place value
←
Switch number
←
Place value
←
Switch number
11
GB
All rights reserved by MONACOR
®
INTERNATIONAL GmbH & Co. KG. No part of this instruction manual may
be reproduced in any form or by any means for any commercial use.
