STACKER 2105-KS Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 64

STACKER 2105-KS Скачать руководство пользователя страница 55

STACKER 500KS USER GUIDE 55

Step 7. Attach cables to the LCD Smart Controller

On the back of the LCD Smart Controller, attach the Universal Cable and the 4pin cable. Also,
verify that the jumper is set to 5v. The position of the cables is crucial, so use the graphic below as
a guide.

Step 8. Attach Housing to the LCD Smart Controller or print an LCD Mount

The all metal housing may not have shipped with your Smart Controller. If so, the housing will ship
separately and will include a separate user guide. We are expecting the new housings to arrive by
late December 2015, and we will send them out as soon as possible. Until then, please print the
LCD Smart Controller Brackets from the Kickstarter support page if you want to start using your
Smart Controller immediately. You can download a printable LCD Smart Controller Bracket at

●

http://stacker3d.com/kickstartersupport

The printed bracket is attached to the back of the LCD Controller as shown below by using the
provided hardware.

«
...
53
54
55
56
57
...
»

Содержание 2105-KS

































































Отзывы:

Нет отзывов