STACKER 2105-KS, Руководство пользователя, Страница: 30 / 64

STACKER 500KS USER GUIDE 30
You will be able to access the files on the microSD card through STACKER RUN software by
clicking on the SD Card tab. From the file list, select the file you wish to print.
Save files to SD card from Cura or Slic3r.
Be sure to select “Save in Binary Format”. Also, make sure your SD card is inserted into your
computer, not the controller or LCD smart controller. After the file is saved, now you can move it to
your printer’s controller. If you use a third party slicer, like Simplify3D, use the same method of
saving to SD on your computer, and then transferring it to your printer’s controller.
5.8. First Print
First Layer Height.
It is really important to get the first layer height spot on. If your first layer is too high the filament will
not adhere properly to your print bed. If the your first layer is too low the filament will not be able to
come out of the nozzle and this will result in the filament drive stripping out filament.
You can manually adjust the layer height by turning the fine adjustment knob on the end of the
z­probe. Turning the knob clockwise will LOWER the bed upon rehoming the Z­axis (increasing
layer height). Turning the knob counter clockwise will RAISE the bed into the nozzles upon