STACK ST8120 Display System
Chapter 3. Operating the Display System
User Guide Addendum
5
Chapter 3. Operating the Display System
The operation of the ST8120 is basically the same as that of the
ST8100. This section highlights any differences.
Changing the display layers
The ST8120 has four display layers. These differ significantly from
those of the ST8100 and their layouts are shown below.
Each of the display layers can be displayed in turn by pressing switch 3.
Press switch 3 when display layer 4 in order to return to display layer 1.
ð
The format of the values in these displays will vary for systems
supplied outside the UK, as the parameters are displayed in
different units.
Display Layer 1
Display layer 1 shows:
•
Water Temperature (WATER)
•
Boost Pressure (BOOST)
Note: This illustration shows the Boost Pressure in Bar. In
all units this can also be shown in either Bar or psi - refer
to
