STACK ST8120 Display System
Chapter 4. Configuring the Display System
User Guide Addendum
13
Lap Time popup
Switching Alarms / Lap Time Popup on or off
You can be enable (switch on) or disable (switch off) each of the alarm
warnings or the Lap Time popup by pressing and holding Switch 1 and
then pressing Switch 2.
Note that you might change the preset value of the parameter slightly
while pressing both switches. This does not matter if you are switching
the alarm warning off and, if necessary, you can correct the preset value
after you switch it on again.
Leaving configuration mode
When you wish to return to the normal display, press Switch 4.
