Chapter 3. Operating the Display System
STACK ST8120 Display System
6
User Guide Addendum
Chapter 4. Configuring the Display System
.
The number displayed is Gauge Pressure, where
atmospheric is 0, boost shows as positive and vacuum as
negative numbers. Due to atmospheric variations, the
display may not show exactly 0.00 when the engine is
stationary.
•
Oil Temperature (OIL T)
•
Oil Pressure (OIL P)
Press Switch 3 to see display layer 2.
Display Layer 2
Display layer 2 shows:
•
Water Temperature (WATER)
•
Boost Pressure (BOOST)
•
Intake Air Temperature (AIR T)
•
Fuel Pressure (FUELP)
Note: When a low-range fuel pressure sensor (2Bar /
30psi) is fitted, the pressure is displayed as 0.1 PSI (US
and UK) and as 0.01 Bar (EC)
Press Switch 3 to change display to layer 3
