STACK ST8120 Display System
Chapter 3. Operating the Display System
User Guide Addendum
9
Alarms
The ST8120 Display System has the following built-in alarms:
Parameter
Alarm is triggered
when the:
Gated to RPM
Oil Temperature
current value exceeds
the preset value
Yes
Water Temperature
current value exceeds
the preset value
Yes
Oil Pressure
current value drops
below the preset value
No
Fuel Pressure
current value drops
below the preset value
Yes
Battery Voltage
current value drops
below the preset value
No
Boost Pressure
current value exceeds
the preset value
No
Intake Air Temperature
current value exceeds
the preset value
No
Lap times
The lap time is displayed for eight seconds either when triggered by the
infra-red lap time sensor on passing the lap time beacon or when the
driver presses Switch 4. The popup duration can be changed, or this
popup can be turned off completely using the configuration menu (see
Chapter 4. Configuring the Display System).
The most recent lap time is held in display layer 4. Press Switch 3 to see
this display layer. This display gives you the lap number and time of the
last recorded lap.
