40287-1307
2
18
INSTALLING THE BATTERIES
NOTE: Do not mix old and new batteries. Do not
mix alkaline, standard or rechargeable batteries.
Push the battery cover locking tab with a screwdriver
to release the cover. Install the (4) AA alkaline
batteries as shown. Replace the cover by inserting
the rear tabs in the slots and snapping the cover in
place.
NOTE: If the batteries are low the red indicator will
stay on after scanning. Replace with 4 new AA
alkaline batteries as shown.
When you first install the batteries, you can open the
safe by pressing the START button (2). For security
you must record your fingerprint after you install the
batteries so the safe will read only the recorded
fingerprints.
•
Locate the safe at a height
that allows easy access to the
fingerprint scanner.
In order to improve the rate of fingerprint
identification please follow these suggestions:
•
Record several of your fingerprints in case you
sustain a cut or an injury to a finger you have scanned.
•
Make sure your entire fingerprint crosses the
scanner.
•
Use a similar scanning motion when opening the
safe.
•
If your hands have oil, lotion or are dirty the
fingerprints may not scan correctly.
TIPS FOR RECORDING FINGERPRINTS
•
Scan your finger by
sliding it over the scanner
in a straight and even
manner from back to front
taking 1 to 2 seconds to
make the scan.
Correct
Incorrect
