Step 8.
Check ETS USB interface.
Figure 71.
Checking the USB interface
Step 9.
Click on the [
Test
] button.
Successful testing returns an [
OK
] message.
4.1.4
ETS project overview
ETS project shows the KNX system topology.
For evaluation purposes KNX topology is simple (limited to 5 devices maximum).
Expanding RF line, you can find three RF objects: TP/RF coupler (by Tapko), KNX-RF push button application
and KNX-RF LED actuator application.
Figure 72.
KNX system topology
4.1.5
Addressing KNX devices
For each KNX device, the ETS project gives an addressing table which includes instructions on how to send
commands and responses to/from devices.
UM2920
ETS5 setup through Tapko RF/TP coupler
UM2920
-
Rev 1
page 42/71
