3
Point-to-point KNX-RF communication setup
This section describes KNX-RF point-to-point communication setup either using
kits.
3.1
BlueNRG-2 setup
3.1.1
Hardware setup
Step 1.
For
kit evaluation setup, use two pairs of:
–
–
kits:
or
Step 2.
Figure 26.
S2-LP and BlueNRG-2 stack plus antennas
3.1.2
Software setup
Step 1.
Launch
.
Note:
Before flashing pre-compiled binaries, it is recommended to erase
UM2920
Point-to-point KNX-RF communication setup
UM2920
-
Rev 1
page 18/71