Figure 23.
ETS connectivity based on STM32L0 development boards
2.8
ETS connectivity through USB dongle based on BlueNRG-2 evaluation kits
This topology is based on Tapko Technology USB dongle and KNX wired infrastructure (KNX bus power supply
and KNX USB interface). KNX-RF application examples are based on
BLE SoC kits (
). Its purpose is to configure, monitor and control KNX-RF devices using ETS5 tool.
Moreover, it demonstrates KNX-RF communication with KNX infrastructure (based on wired KNX devices) as well
as extra connectivity through smartphone (only the KNX-RF switch application is controlled via BLE).
Figure 24.
ETS connectivity through USB dongle based on BlueNRG-2 evaluation kits
UM2920
ETS connectivity through USB dongle based on BlueNRG-2 evaluation kits
UM2920
-
Rev 1
page 16/71
