ST STM3210B-EVAL, Руководство пользователя

Страница: 9 / 46

UM0426 Hardware layout and configuration
Doc ID 13472 Rev 5 9/46
2.1.2 MB542 board version B-00 or earlier
If your STM3210B-EVAL product includes the MB542 board version B-00 or earlier, it is
mounted with:
●
LCD reference AM-240320LTNQW01H.
●
Controller reference is HX8312-A (from Himax, www.himax.com.tw).
●
The products that include this LCD do not have a label on the component side of the
daughterboard as shown in
Figure 6 . The label is on the solder side, therefore not
visible when the MB452 board is screwed onto the MB525 board.
The demonstration software delivered with the evaluation boards that do not carry a visible
label is STM3210B-EVAL_DEMO version 1.0 or earlier. This software only supports the
LCD reference AM-240320LTNQW01H.
Note: You can download the latest version of the software demonstration from the
STmicroelectronics support site, www.st.com/mcu. The STM3210B-EVAL_DEMO software
is included in the STM3210B-EVAL demonstration software user manual (UM0435)
download file. STM3210B-EVAL_DEMO version 1.1 and later support both types of LCD.
Figure 6. No LCD label on component side of MB542 board version B-00
2.2 Power supply
The STM3210B-EVAL board is designed to be powered by a 5 V DC power supply and to be
protected by PolyZen U6 in case of incorrect power supply configuration. It is possible to
configure the evaluation board to use any of the following sources for the power supply.
●
5 V DC power adapter connected to CN4, the power supply jack labeled “PSU” (for
Power Supply Unit) on the silkscreen
●
5 V DC power with 500 mA limitation from CN1, the type-B USB connector on the
evaluation board labeled “USB” on the silkscreen
●
5 V DC power from both CN12 and CN13, the daughterboard extension connectors
labeled “DTB” (for daughterboard) on the silkscreen
The power supply is configured by setting the related jumpers JP4, JP9 and JP11 as
described in
Table 2 .
www.BDTIC.com/ST