ST STM3210B-EVAL, Руководство пользователя

Страница: 8 / 46

Hardware layout and configuration UM0426
8/46 Doc ID 13472 Rev 5
2.1 LCD configuration
The STM3210B-EVAL can be delivered with either one of two LCDs daughterboards
mounted, depending on the board version.
●
MB895/S: only one LCD reference
●
MB542: two different LCDs are possible depending on the MB542 version.
These two LCDs look alike and operate in the same way, however they have different control
circuits, and therefore require different software drivers.
You must ensure that the demonstration software pre-loaded in the Flash memory of the
microcontroller on the evaluation board supports the LCD that you have.
2.1.1 MB895/S or MB542 board version B-01 or later
If your STM3210B-EVAL product includes the MB895/S or MB542 board version B-01 or
later, it is mounted with:
●
LCD reference AM240320L8TNQW-00H (from Ampire).
●
Controller reference is ILI9320 (from ILITEK, www.ilitek.com).
●
The products that include this LCD have a label on the daughterboard (to the left of the
display) as shown in
Figure 5 .
The demonstration software delivered with the evaluation boards that carry this label is
STM3210B-EVAL_DEMO version 1.1 or later. It automatically detects which version of the
LCD is mounted on the daughterboard, and it supports both.
Figure 5. LCD label on MB542 board version B-01 or later
Table 1. LCD label on MB542 board version B-01 or later
Label marking Meaning
MB542B-0120743001
LCD version B-01
B PCB version B
01 Version 01
20743001 Board ID 20743001
www.BDTIC.com/ST