<volume>
Default:0; Indicates the memory volume.
<erase>
Default:0; when”1”, the specified volume is fully erased
6.30
AT+S.HASH
The command is used to compute a message digest of a given file.
Usage:
AT+S.HASH=[<function>],<filename><cr>
Parameters:
<function>
Default:0; Indicates the selected hash function. Possible
values are 0: SHA1; 1: SHA224; 2: SHA256; 3: MD5
<filename>
filename to be used
Result:
AT-S.SHA1:<digest>
or
AT-S.SHA224:<digest>
or
AT-S.SHA256:<digest>
or
AT-S.MD5:<digest>
<digest>
Specifies the digest of given file
6.31
AT+S.WPAECERT
To manage WPA certificates in the module Flash memory.
Usage:
AT+S.WPAECERT=content,<option><cr>
to list or to remove certificates within the Flash
AT+S.WPAECERT=<kind>,<size><cr>{data}
to load certificates/key within the module memory
Parameters:
<option>
When the value is equal to 1, the command lists the
certificates and key stored in the Flash memory. When the
value is equal to 2 the command removes certificates and
keys stored in the Flash.
UM2114
AT+S.HASH
UM2114
-
Rev 3
page 23/66