ST SPWF04S Series, Руководство пользователя

Страница: 43 / 66

Variable name Default value Type Description
console_wind_off_low 0x00000000 HEX
Wind 0:31 mask
0xFFFFFFFF are disabled
all the 32 Wind indicator
console_wind_off_medium 0x00000000 HEX Wind 32:63 mask
console_wind_off_high 0x00000000 HEX Wind 64:95 mask
wifi_tx_msdu_lifetime 0 INT
MSDU lifetime. From 0 to 2^32-1 TUs (1
TUs=
1024μs). Zero is default (automatic)
wifi_rx_msdu_lifetime 0 INT
MSDU lifetime. From 0 to 2^32-1 TUs (1
TUs=
1024μs). Zero is default (automatic)
wifi_operational_mode 0x00000011 INT
Allows choosing Doze (11) or quiescent (12)
power device modes
wifi_beacon_wakeup 1 INT(sec)
Set the wakeup interval of the WLAN device,
from 1 to 255 if wifi_listen_interval = 0; from 1
to 65535 if wifi_listen_interval = 1
wifi_beacon_interval 100 INT
Beaconing interval in MiniAP mode, from 0 to
2^16-1
wifi_listen_interval 0 INT
Define the wakeup mode (0 = sleep up to the
beacon_wakeup specified, 1 = sleep at least
to the beacon_wakeup specified)
wifi_rts_threshold 3000 INT
Frame size over which RTS/CTS is used.
Limit:
from 0 to 3000
wifi_ssid
53:54:54:65:73:74:00:
00:00:00:00:00:00:00:
00:00:00:00:00:00:00:
00:00:00:00:00:00:00:
00:00:00:00
HEX[32]
Can be get/set with the command AT
+S.SSIDTXT. Desired SSID specified in hex.
All 32 octets should be written. Note that
wifi_ssid_len must also be set.
wifi_ssid_len 6 INT
Can be set with the command AT
+S.SSIDTXT.
Length of the actual SSID
in the 32 byte buffer
wifi_txfail_thresh 5 INT
Maximum number of lost packets before
disassociation
wifi_dtim_period 1 INT
Amount of frames stored for associated
powersaving STAs. 0=do not store frames,
1=store 1 frame
wifi_add_tim_ie 0 INT
Whether or not to add the TIM information
element in miniAP beacons. 0=do not add,
1=add
wifi_region 1 INT
Setting the scan process used during the
command AT+S.SCAN. set the channels
allowed for active scan (0 = always passive
scan, 1 = active scan only on channels
enabled by wifi_chan_activity2 status variable
[default], 2 = USA X10 [1-11], 3 = Canada
X20 [1-11], 4 = Europe ETSI X30 [1-13], 5 =
France X32 [10,11], 6 = Japan X40 [1-13], 7 =
Japan X41 [10,11,14]
UM2114
Variables and values
UM2114 - Rev 3
page 43/66