WIND ID
WIND message
Variables
Description
Application notes
85
"DHCP failed to get a lease"
%u
Failure reason. Range Values.
0.
Shown when DHCP server does not respond
1.
Shown when DHCP server answer has a wrong
message format
2.
Shown when given timeout value is not acceptable
3.
Shown when received a NACK
4.
Shown when DHCP server does not provide an IP
address
5.
Shown when DHCP server provide a lease time
smaller than 50s
6.
Shown when DHCP Lease Time expired
86
"MQTT Published"
%u:%s:%u:%u:
%u:%u:%u:%s
Client ID, topic,QoS,retain,dupl,msg siz,tot siz,msg
87
"MQTT Closed"
%u:%u
Closure reason (0: connection level; 1: MQTT protocol
level), Client ID
88
"WebSocket Data"
%u:%u:%u:%u:
%u
Client ID, lastframe flag, lastfrag flag rcv bytes,
cumulated bytes
89
"WebSocket Closed"
%u
Client ID
AT+S.WSOCKC needs
to be called to flush the
buffer and clear the
websocket state
90
"File Received"
%i:%s
Client IP (only provided if file comes from TFTP client),
Filename
UM2114
Synchronous errors and WIND messages
UM2114
-
Rev 3
page 59/66