WIND ID
WIND message
Variables
Description
Application notes
38
“WiFi Powered Down”
39
“HW in MiniAP Mode”
40
“WiFi Deauthentication”
%u
Refer to standard
41
“WiFi Disassociation”
%u
Refer to standard
42
“WiFi Unhandled
Management”
%02x
Received Frame
43
“WiFi Unhandled Data”
%02x
Received Frame
44
“WiFi Unknown Frame”
%04x
Received Frame
45
“Dot11 AuthIllegal”
%u:%u
Authentication Algorithm, authentication sequence
46
“WPA Crunching PSK”
%s:%u
PSK,length
47
Reserved
48
Reserved
49
"WPA Terminated"
%d
Exit Status
50
"WPA Start Failed"
%u
Failure Reason. Range Values.
1.
Shown when WPA Supplicant was not able to start
2.
Shown when WPA Supplicant was not able to
create peer table
51
"WPA Handshake Complete"
52
"GPIO Interrupt"
%u:%u
GPIO number, level
53
"Wakeup"
54
Reserved
55
"Pending Data"
%u:%u:%u:%u
Server ID, Client ID, Received bytes, cumulative bytes
56
"Input to remote"
%u
Input ID
Only printed when
buffer for input request
is empty. Buffer is filled
and cleared by AT
+S.INPUTSSI
command
57
"Output from remote"
%u:%s
Received message length, message
Maximum allowed
length is 128. Every
message longer than
128 will be truncated.
Use multipart/form-
data webserver
capability to send more
than 128 bytes. Refer
to AN4965 "WebServer
on SPWF04S module
58
"Socket Closed"
%u:%u
Client ID
Closure Reason. Values range
0.
Shown when remote TCP sent a FIN
1.
Shown when Remote TCP sent a RST, or did not rely
to FINACK
2.
Shown when too many retransmissions have occurred
3.
Shown when network layer has broken
4.
Shown when a timeout occurred
5.
Shown when ICMP Destination Unreachable was
received
AT+S.SOCKC/AT
+S.SOCKDC needs to
be called to flush the
buffer and clear the
socket state
UM2114
Synchronous errors and WIND messages
UM2114
-
Rev 3
page 57/66
