SST SST-ASI-SLC, Руководство пользователя

Страница: 43 / 74

Configuring the Master and Slaves
37
6.6
Running the Scanner
When you put the SLC in run mode, the scanner starts scanning the
AS-Interface. You can then begin accessing the data in the I/O files.
6.6.1 SLC Modes
The scanner mode of operation follows the SLC mode of operation (program,
test, run).
When the SLC is in program mode, the scanner outputs are off and inputs
hold their last state.
When the SLC is in test mode, inputs are read and updated but outputs are
off.
When the SLC is in run mode, the scanner updates inputs and outputs.
6.6.2 SLC Fault Codes
SLC fault codes are listed in the LED Status and SLC Fault Codes table in
section 9.1.