SST SST-ASI-SLC, Руководство пользователя

Страница: 70 / 74

SST-ASI-SLC User’s Guide
64
List of implemented functions:
No. Function or call at host interface P_ Remark/
Implemented
by
1 Image, Status = Read_IDI () X Input
2 Status = Write_OD (Image) X Output
3 Status = Set_Permanent_Parameter (Addr, Param) X G File/Config
4 Param, Status = Get_Permanent_Parameter
(Addr) X M file
5 Status, RParam = Write_Parameter (Addr, Param) X Output
6 Status, Param = Read_Parameter (Addr) X Input
7 Status = Store_Actual_Parameters () X Config
8 Status = Set_Permanent_Configuration (Addr,
Config) X G File/Config
9 Status, Config = Get_Permanent_Configuration
(Addr) X M file
10 Status = Store_Actual_Configuration () X Config
11 Status, Config = Read_Actual_Configuration (Addr) X Config
12 Status = Set_LPS (List31) X G file
13 Status, List31 = Get_LPS () X M file
14 Status, List31 = Get_LAS () X M file/Config
15 Status, List32 = Get_LDS () X M file/Config
16.0 Status, Flags = Get_Flags () X M file
16.1 Status, Flag = Get_Flag_Config_OK () X M file
16.2 Status, Flag = Get_Flag_LDS.0 () X M file
16.3 Status, Flag = Get_Flag_Auto_Address_Assign () X M file
16.4 Status, Flag = Get_Flag_Auto_Prog_Available () X M file
16.5 Status, Flag = Get_Flag_Configuration_Active () X M file
16.6 Status, Flag = Get_Flag_Normal_Operation_Active
() X M file
16.7 Status, Flag = Get_Flag_APF () X M file
16.8 Status, Flag = Get_Flag_Offline_Ready () X M file
17 Status = Set_Operation_Mode (Mode) X Automatic