User Manual
Embedded EtherNet/IP Module
GS11-EI
32
“Port” is the serial port being used; “Baudrate” is current serial port baud rate set by DIP switches.
After configuring parameters, click “Initialize” to establish the connection and initialize hardware
configuration.
When choosing “Setting the IP address via host interface (UART)”, click “Initialize” to send initial messages
and enter the running status.
If “Setting the IP address via host interface (UART)” is not chosen, click “Initialize” and enter the running
status directly.
If the connection is established successfully, all the options in the Parameters Configuration section will be
grayed, “Run” button will change to “Stop” and “Transmit” button will change to be usable.
