INSTRUCTION SHEET
PRT-1600 PULSE RADIO TRANSMITTER
(con't)
RADIO OUTPUT -
The PRT-1600's Transceiver/Antenna Unit(PRNT-1600) contains a 900MHz band FHSS
radio transceiver with an integral antenna mounted inside the unit. See diagram for mounting method and
considerations. Transmission is LINE OF SIGHT up to approximately 5,000 feet max. Metal poles, buildings or
other objects will affect the distance the radio system will effectively work. Trees may also affect transmission
distance. The user bears all responsibility for proper mounting and operation of the unit within the PRT-1600's
operating parameters.
Revision: 4/10/22
PRT-16
Transmitter
Base Unit
(Not to Scale)
8-Conductor (4-Twisted Pairs)
24AWG Control Cable with
shield -100' max.
POWER INPUT - The PRNT-1600 receives its power supply from the PRT-16 Transmitter Base unit.
NOTICE TO USER
-
FCC ID: TIT-PRT-1600
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference; and
2. This device must accept any interference received including interference that may cause undesired operation.
1
2
3
4
5
6
7
8
9
METER INPUTS -
See the PRT-16 Base Unit Instruction Sheet for detailed information on connecting the K-Y
pulse inputs to the Electric Meter's KYZ Pulse output.
7
TRANSMITTER CHANNEL -
Set the channel number (hop sequence) using DIP Switches #1 through #3 ON
DS1 as shown in Table 1 on page 4. This is set on the PRT-16 Transmitter Base Board.
PRNT-1600
Transmitter/
Antenna Unit
DS1