Mtr 1
PRR-16
Base Unit
PRL-1600 Wireless Pulse Link Application
PRT-16 or
PRT-16CS
Base Unit
K
Y
s
4/10/2022
N/A
A
DATE ORIGINAL
LATEST REVISION
SCALE
JOB NO.
REVISIONS
NO.
DATE
DESCRIPTION
WHB
DRAWN
CHECKED
PRL-1600
Wireless Pulse Link
System Diagram
Solid State Instruments
div. of
Brayden Automation Corp.
6230 Aviation Circle
Loveland, CO 80538
(970)461-9600
www.solidstateinstruments.com
Outputs - Form A
mode shown
PRNT-1600
Transmitter/
Antenna Unit
PRNR-1600
Receiver/
Antenna Unit
#24AWG 8-
conductor (4-
pair) shielded
control cable.
900MHz*
Radio
5000' Range
Notes:
1.) Configure each end to the same mode Form A or Form C. Make sure that the utility configures all the meter's outputs
for toggle mode, not momentary mode. Form C (3-wire) mode is preferred from the meter to the transmitter's input. Set
both the transmitter and receiver to Form C by setting Dip Switch #6 to the UP position. Using two wires (K and Y) on a
Form C output is acceptable.
2,) Dip Switch #8 must be DOWN on the both ends for normal operation (in RUN mode).
3.) Transmission is Line-Of-Sight and must not be blocked by trees, buildings, metal poles, trucks, railcars, etc.
4.) Transmission distance is variable up to 5000' depending on conditions. Distance and reliability will increase as the
height mounted above the ground increases. During extremely heavy rain, transmissions may not be reliable.
18
#24AWG 8-
conductor (4-
pair) shielded
control cable.
Mtr 2
K
Y
Mtr 3
K
Y
Mtr 4
K
Y
K1
Y1
K1
Y2
K2
Y3
K2
Y4
Out 1
Out 4
Out 3
Out 2
Pulses from Input 1
Pulses from Input 2
Pulses from Input 3
Pulses from Input 4
PRT-1600
Transmitter
Mtr 1
K
Y
Z
Mtr 2
K
Y
Z
Form C
Inputs
Form A
Inputs
K1
Y1
Z1
Out 1
K2
Y2
Z2
Out 2
Outputs - Form C
mode shown
PRR-1600
Receiver
Revision: 4/10/22