SS Telecoms SS-77 uTMS, Руководство пользователя

Страница: 9 / 37

SS-77 uTMS USER MANUAL
DOC. NO: SS-77 uTMS (REVISION 08) Page 9 of 37
7. GETTING STARTED
7.1. As delivered from the factory the buffer can be accessed for setup in the following ways:
7.1.1. On serial port 1 using a communications package such as HyperTerminal or using
the NG Tool. The port settings are 115200 baud, 8 data bit, no parity, 1 stop with
hardware flow control disabled.
7.1.2. Via LAN. Use an Ethernet Telnet terminal package. The SS-77 defaults to using
DHCP with its NetBIOS Name set to SS-77- followed by the last 6 digits of the
MAC address. For example, if the MAC address is 00:21:44:12:34:56 the NBNS
name is ‘SS-77-123456’.
7.1.3. The buffer can also be accessed and programed using the NG Buffer Tool. Please
see section 8.1 “Using the NG Software Programming Tool.”
7.2. Character Echo. To function correctly with NetLog and other data collection packages the local
echo of typed characters is disabled. In order to view what is being typed it is necessary to
enable local echo. The simplest way to do this is to enter the command “ECHO ON”. This will
automatically be cancelled when the SS-77 is reset. Alternatively one can enable echo in
HyperTerminal by selecting:
“Properties->Settings->ASCII Setup->Echo typed characters locally”
This session can be saved for future use as SS-77 and the settings will be retained.
8. USING THE NG PROGRAMMING TOOL
Note: The NG Programming Tool can be downloaded from SS Telecoms web site.
8.1. NG MAIN TERMINAL SCREEN
NG Tool Main Screen
The SS-77 Tool can be used as a terminal program enabling the user to issue commands via the
terminal screen. The main purpose of the Tool is to make programing of the buffer user-friendly.
Setting Description
Main Screen