SS Telecoms SS-77 uTMS, Руководство пользователя

Страница: 15 / 37

SS-77 uTMS USER MANUAL
DOC. NO: SS-77 uTMS (REVISION 08) Page 15 of 37
FTP
Settings
Buffer ID
The records in the buffer will be downloaded to a file. The
file name will be the buffer ID and the current DateTime.
E.G.:BUFFERID_YYMMDD_hhmmss.log
FTP Server
Sets the address of the FTP server. It needs to be in dotted
notation (E.g 196.213.211.32)
FTP Username Sets the FTP Username. Maximum length is 12 characters.
FTP Password
Sets the FTP password for Username. Maximum length is
12 characters.
FTP Path
This selects the directory from which to extract the files or in
the case of FTP push the directory for uploading the
records.
FTP Connection Time
Every Hour This will set the FTP client to upload the
data file every hour at the Minute
specified.
Specific Time Sets the hour and minute upon which
the FTP Client will upload the data file.
This is to provide a staggered download
from the field to reduce the peak load on
the server.
Protocol
Settings
Translate
Option
The Translation Option to use. This depends on the make and model
of the PABX. Most PABX system use standard ASCII. ASCII is the
default.
Binary Unformatted data – any character sequence
ASCII Vanilla ASCII using CR / LF
RoboDog Proprietary Security
Stx Etx ASCII special start and end characters
Default Log
Port Sets the logging port to be used in the event that a ‘generic’
translation option is used.
LAN Log
Mode This sets the mode of the LAN logging socket.
Server The buffer will be passive and will wait for an incoming
connection from the PABX
Client The buffer will be active and will make an connection to
the PABX
Short Record
Elimination Valid values are from 0 to 39. If this value is set to a value other than
0, it will prevent the storage of a record that has less characters than
it is set. I.E. Setting it to 10 will prevent the storage of records with
less than 10 characters. It is only active for ASCII and STX ETX
modes. The default value is 1 ensuring that empty lines (CR/LF only)
are eliminated.
LAN Log IP
Address If the LAN Log mode is set to Client, this would be the PABX IP
address to which the SS-77 will connect to, to retrieve data.
LAN Log
Local Port This sets the LOCAL port number. If the LAN Log mode is set to
Server, this would be the port that the buffer would listen on for
incoming connections from the PABX.
LAN Log
Remote Port This sets the REMOTE port number. It is the port number on which
the buffer will connect to the PABX. It is not used if the mode is TCP
Passive (Server).