Spyder MR6, Руководство пользователя

Страница: 6 / 32

MR6 BARREL INSTALL / REMOVE / SETUP
To install the barrel you must lineup the center arrow marked on the barrel to the arrow marked on the shroud
sight (see figure A) once lined up, insert the barrel.
To set up for “Magazine” feeding, turn the barrel counterclockwise making sure the arrow marking on the barrel
(M ) is lined up with the arrow marked on the shroud sight (see figure B).
To set up for the “Loader” feeding, turn the barrel clockwise making sure the arrow marking on the barrel (L )
is lined up with the arrow marked on the shroud sight (see figure C).
Removing the barrel you must lineup the center arrow marked on the barrel to the arrow marked on the shroud
sight (see figure D) once lineup then pull the barrel out.
PROPER USE OF YOUR BARREL BLOCKING DEVICE
A Barrel Blocking Device or “BBD” is an essential part of your paintball safety equipment. The Barrel Blocking
Device is designed to stop a paintball from exiting a paintball marker accidentally. Improper use of the Barrel
Blocking Device will render this device useless.
BARREL SOCK/BAG TYPE DEVICE
Place the bag/sock part of the Barrel Blocking Device over the end of your barrel and wrap the elastic cord
around the back end of your marker.
Adjust the length of the elastic cord to make sure your Barrel Blocking Device fits securely over your markers
barrel. NOTE: If the elastic cord is too long you can tie a couple of knots around the cord to shorten its length.
BARREL PLUG TYPE DEVICE
Insert the barrel plug securely into the end of your markers barrel before proceeding to load paintballs and
screwing in your tank to your marker.
The barrel plug should fit firmly into the barrel with a significant amount of resistance. NOTE: The barrel plug
should not be easy to remove and always inspect the O-rings to make sure they are not worn or cut.
IMPORTANT: Remove the Barrel Blocking Device only when you are getting ready to begin play or have been
instructed to do so by a field safety official.
Always keep your Barrel Blocking Device on your marker after you have finished playing. Keep it in place
even after you have emptied all paintballs and removed your air tank from your paintball marker.
WARNING: Inspect your Barrel Block Device regularly for wear and any tear if it is worn, replace it immediately.
3