Spyder MR6, Руководство пользователя

Страница: 7 / 32

INSTALLING A CO2 / COMPRESSED AIR TANK
Firmly screw the CO2 / Compressed Air Tank clockwise into the markers C/A Adapter. HELPFUL TIP: Before
installing a CO2 / Compressed Air Tank, make sure that the tank is full and that it has a urethane bottle O-ring
on the top of the valve to prevent air leaks. IMPORTANT: You should never need to use any hand tool to attach
a CO2 / Compressed Air Tank to the C/A Adapter.
REMOVING A CO2 / COMPRESSED AIR TANK
Firmly unscrew the CO2 / Compressed Air Tank by turning the tank counter-clockwise until it comes out of the
C/A Adapter. HELPFUL TIP: After firing the marker, you should ALWAYS remove the CO2 / Compressed Air
Tank before storing. When the tank is being removed, excess air will release from the C/A Adapter. CAUTION:
Never expose any skin to the C/A Adapters bleed hole when removing the tank. This is to avoid the risk of
getting skin burn from the escaping GAS.
IMPORTANT: You should never need to use any hand tool to detach a CO2 / Compressed Air Tank from the C/A
Adapter. If you cannot remove a tank by hand please see a certified airsmith for assistance.
INSTALLING CARRYING HANDLE W/SIGHT
Loosen both Locking Screws from the Carrying Handle Sight.
Place the Carrying Handle Sight to fit above the Picatinny Body Rail. Make sure to align the Locking Plate with
the Carry Handle Sight. Then Fasten both Locking Screws. NOTE: The Carrying Handle Sight adjusting wheel
should be on the Right side and at the rear of the Receiver.
INSTALLING / REMOVING A PAINTBALL LOADER
IMPORTANT: The Barrel must be installed before loading
the Magazine or Paintball Loader. Attach an electronic or
gravity paintball loader to the Markers Feed Neck and
tighten the set screw. Only use .68 caliber paintballs
through the loader.
Loosen the Feed Neck set screw and remove the
electronic or gravity paintball loader. When removing the
loader make sure to remove all paintballs. CAUTION:
There may be paintballs in the Markers breach; take a
couple of shots in a safe direction to make sure the Barrel
and Receiver are empty.
English
4