SPX Waukesha Cherry-Burrell CM, Инструкция по эксплуатации

Страница: 11 / 22

11 95-03028 08/2010
MaInTenance
4. Remove rotor retaining nut and disassemble
o-ring.
5. Slide rotor off shaft, handle with care to avoid damage
to rotor or seal seat which is contained in rotor.
6. Gently pull seal seat from back of rotor and remove
o-ring.
7. Remove seal assembly from shaft.
8. Remove four 1/2-13 hex nuts which secure body to
bearing case and slide body off.
9. Remove four capscrews from gland on back side
of body and disassemble gland.
There are six loose
springs in the gland. The gland lip seal can be pressed
out if replacement is required.
10. Remove o-ring from inside body. use o-ring tool if
necessary.
NOTE: Clean and inspect all parts thoroughly. DO NOT
reuse seal or seal seat if scratched, chipped or worn.
5.
9.
sPRInGs
8.
7.
8.
Figure 10
Figure 11
O-RInG
4.
seal seaT
O-RInG
6.
10. O-RING
lIP seal
9.