SPX Waukesha Cherry-Burrell CM, Инструкция по эксплуатации

Страница: 10 / 22

95-03028
08/2010 10
b. PaRTIal DIsasseMblY:
caution: handle all parts carefully to avoid nicks and
scratches which will be detrimental to operation of the
mill.
1. Remove “T” handles.
2. Back out knurled lock screw.
3. Pull the cover/stator assembly outward. Some
resistance to stator movement will be encountered
which is due to friction from the o-ring
.
As soon as the o-ring is free, the cover and stator
assembly can be easily removed. It is not necessary to
remove adjusting ring. Disassembly to this point allows
complete drainage.
NOTE: To prevent wearing of the faces between the
adjusting ring and stator, it is recommended that these
surfaces be lubricated occasionally with an approved
silicone type lubricant.
T-hanDle
knuRleD lOck
scReW
Figure 7
O-RInG
aDJusTInG RInG
Figure 8
MaInTenance
c. cOMPleTe DIsasseMblY:
1. Follow 3 steps outlined in B.
2. Remove cover capscrews and pull off cover, then
remove the o-ring.
3. Pull stator off studs and remove o-ring.
cOVeR
sTaTOR
O-RInG
O-RInG
Figure 9
cleanInG
a. FlushInG
In some instances the unit can be cleaned by merely
flushing water through it while the mill is in operation.
however, some of the water will remain in the bottom
of the cone shaped stator. If this is not permissible it
is then recommended that the unit be dismantled for
cleaning.