1
3
Using the grinder
Note: this is an optional purchase and not included with mixer. To purchase, contact
Sunpentown and request Model 106-GRIND. (800-330-0388/www.spt-usa.com)
Note: Mixer shaft and grinder works simultaneously.
1. Remove cover on the motor head. (Fig.9-1)
2. Hold the grinder part at about 2 o-clock position and insert into opening. (Fig.9-A)
Turn to the left to lock in place (Fig. 9-B)
3. Insert the feed screw (C) into the head, long end first. Turn the feed screw slightly
until it is set into the housing.
4. Place the cutting blade (D) onto the feed screw shaft with the blade facing the
front as illustrated. If not fitted properly, meat will not grind.
5. Place the desired stainless steel disc (E) onto the shaft. Align the fitting
protrusions in the slots.
6. Support or press the center of the plate with one finger while screwing on the
fixing ring (F) with other hand until firmly in place. Do not over tighten.
Fig 9
Fig 10
