How to adjust the all-angle axle:
1. Place the server on a stable work surface with the back of the server
facing you and fully close the cover. The cover does not need to be
taken off.
2. Locate the (2) screws found on the back of the axle. The left screw
with a “+” and “
-
” above it is the adjustment screw.
12
13
NOTICE:
Decreasing tension too much will cause the
cover to not stay open unless manually held open by the
user.
NOTICE:
Reflection Induction Buffet Servers do not
have self-closing axles. All-angle axles allows the cover to
be placed at any angle when opening without closing on
the user.
3. With
a 5/32” Allen wrench, turn the adjustment screw to the left to
increase axle tension or right to decrease axle tension.
4. Test the tension setting after every half-turn by opening and closing
the cover. Stop turning once the desired tension is reached.
NOTICE:
Increasing tension will cause the lid to catch
sooner. Decreasing the tension will cause the cover to
close faster.
