2
3
Installation
Inspect all parts of the Reflection Induction Buffet Server prior to
installation and use. If the server is damaged, do not use. Contact a
supplier for a replacement.
To prepare the server for use, place the unit on an induction range or
hidden induction surface that is in a flat, level position. The support
Before You Begin
To ensure safe operation, read the following instructions in their
entirety.
Warning is used to indicate the presence of a hazard that can cause
severe personal injury, death, or substantial property damage if the
warning is ignored.
Caution is used to indicate the presence of a hazard that will or can
cause minor personal injury or property damage if the caution is
ignored.
NOTICE
Notice is used to note information that is important but not
hazard-related.
To reduce risk of injury or damage to the equipment:
•
Equipment should only be used in a flat, level position.
•
Do not obstruct or cover the equipment in any way when in use.
•
Do not store or place any materials below the equipment when in
use.
•
Always turn off and unplug electric heating elements when not in
use.
•
Always allow equipment to cool before handling.
•
Do not operate without water in the water pan.
•
Do not operate unattended.
•
Closely supervise equipment operating in public areas and/or around
children.
•
Do not operate if equipment has been damaged or is malfunctioning
in any way.
Function
Spring USA’s Reflection Induction Buffet Servers are
induction ready
vessels with a water-based system intended for serving prepared food.
Food must be at or above serving temperature before being placed in
the servers. Adapter frames enable use of electric heating elements
with the full size, round or square server. All servers can also be used
with an optional stand and canned fuel (not included).
NOTICE:
Reflection Induction Buffet Servers only
maintain temperature
–
they are not intended for
cooking food.
Figure 1. Support Stabilizer Bar and Bumper
stabilizer bar with
bumper located in the
back of the vessel is
used to keep the vessel
in place. See Figure 1
for reference. Be sure
the bumper is in contact
with the top surface of
the range or induction
surface so that the
bumper creates a seal.
Support
Stabilizer
Bar
Bumper
For use with induction:
