7
The battery must be electrically isolated from the system during all work
on the system. The rotor must not run loose during work by tying up a rotor blade,
otherwise the charge controller may be destroyed. The electrical installation must
be completed.
3. Technical data
3.1 Wind generator
3.1.1 Electrical data
Generator type
Permanent magnet generator, 3-phase,
AC
Nominal voltage
12 V DC / 24 V DC / 48V DC with
boost charge controller
Rated capacity
600 Watt 700 Watt 800 Watt
Nominal wind speed
Ca. 14 m/s
Start-up wind speed
Ca. 3 m/s
Start of charging
Ca. 200 Upm
3.1.2 Mechanical data
Safety test in the wind tunnel
122 km/h
Rotor diameter
1,50 m
Number of blades
3
Blade weight
250g / Blade
Blade material
Carbon Cfk
Hand laminated
Speed range
200 - 950 rpm
