5
3.1 INTRODUCTION
The Spraying Systems Co. AutoJet
®
VC10 Industrial Heated Spray System can be used at the heart of any spray
application when temperature and pressure control is needed in a variety of viscous heated applications. The system
provides temperature control to heat any fluid that must maintain a specific higher temperature for spraying. This
system conveniently pairs with many nozzle or spray header setups that are desired for your heated spray system
applications.
3.2 PRODUCT FEATURES
The AutoJet
®
VC10 Industrial Heated Spray System consists of a stainless steel pressure tank with a heater for constant
heating of your process fluid. The desired temperature of your process fluid is controlled by a liquid heater pump that
is constantly recirculating water through the heater. An agitator keeps the fluid moving around the heater to ensure
consistent temperature and helps to maintain your fluids in suspension. This system is also equipped with a manual
pressure control, auto
-
refill, and continuous level sensor for auto
-
refill.
The control panel for the system can be mounted to the frame with a 1750+ or 2150+ Spray Control Panel for easy
spray control access. Power is distributed to the pump and heater from the system control panel. The control panel
consists of an illuminated
“
Power On
”
and
“
Power off
”
power pushbuttons, and various illuminated selector switches.
A lockout/disconnect switch is mounted on the door. A low
-
level indicator is illuminated when the tank is low.
Illuminated selector switches for
“
Pump On
”, “
Heater On
”,
and
“
Auto
-
Refill On
”
(optional) are used to activate said
features; lamps will be lit when features are running. The heater can be turned on only when the circulation pump is
running.
3.3 SPECIFICATIONS
PANEL POWER REQUIREMENTS
DATA:
Voltage: 480 VAC +/
-
15% 1 ø
Frequency: 60 Hz
Curent : 30 A max
Phase
: 3
AIR INPUT REQUIRENT
DATA
:
Pressure : 0 psi (min), 100 psi (max)
Inlet Port : Tank :
1/4”
NPT (F)
Consumption: Main System: 5 SCFM maximum
ENVIRONMENTAL DATA:
To be installed indoors
Operating temperature range: 41 to 104°F
(0 to 42.8°C)
Humidity Range: 5 to 90% (non
-
condensing)
Enclosures: NEMA 4 (None Explosion Proof)
Height above sea level: <3,280 ft.
CONSTRUCTION DETAILS:
Control panel/tank skid:
Height –
72
in.
Length –
34
in.
Depth –
40
in.
SECTION 3
OVERVIEW OF VC10
LEVEL SWITCHES DATA:
TDR (Time Domain Reflectometry) Level Sensor
-
4 to 302°F (
-
20 to 150°C)
232 psi max. (16 bar)
24 V DC
High Frequency Capacitive Level Switch (stand pipe)
185°F max. (85°C) continuous, 302°F short time
(150°C)
232 psi max. (16 bar)
30 V DC
PRESSURE TANK DATA:
Tank capacity: 10 gallons, 40
-
100 PSI Max, 200F Max
Material: 304 SS, jacketed, insulated
CENTRIFUGAL PUMP DATA:
1/3 hp 208
-
230/480 VAC 1 ø
IMMERSION HEATER DATA:
304 SS screw plug
6K W 480 VAC 1 ø
Stainless steel heating element
70
-
200°F range
Safety Shut Off
