background image

© 2022 All rights reserved. Printed in the U.S.A.

 

Under copyright laws, this manual may not be reproduced in any form, in whole, or in part, without prior written permission from 
Spraying Systems Co

®

. This revision supersedes all previous revisions. Every effort has been made to ensure that the information 

in this manual is accurate at the time of printing. 

 

However, Spraying Systems Co. assumes no liability for errors or omissions and reserves the right to make changes without notice 
to any products described herein to improve reliability, function, or design. Other company and product names may be 
trademarks of their respective companies. 

 

Warranty is one (1) year on non

-

wear parts from ship date. Wear items are covered for manufacturing defect only for a period of 

one (1) year. Wear items include, but may not be limited to, Liquid pump and Liquid regulator. Seller warrants that its products 
will conform to and perform in accordance with the products

’ 

specifications. 

 

Seller warrants that the products do not infringe upon any copyright, patent, or trademark. 

 

THE FOREGOING WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED 
TO, THOSE CONCERNING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 

 

ML00VC10HTSYS  Rev. 2  5/2022                                                                                                      

        

 

 

    

© Spraying Systems Co. 2022 

Содержание AutoJet VC10



















Отзывы: