(24)
CUSHION PAD
(1 PC)
(5)
SEAT TUBE
(1 PC)
(15)
NYLON NUT (1 PC)
(12)
(12)
WASHER (2 PC)
(16)
BOLT M10X85
(1 PC)
(23)
BOLT M8X20
(1 PC)
(6)
SEAT ADJUSTER
(1 PC)
-SEAT ADJUSTER
The following parts are needed in this step.
STEP 3: ASSEMBLING THE SEAT ADJUSTER AND SEAT
09
Align the Seat Adjuster (6) with the holes of the two washers(14) attached on the Seat
Tube (5).
Install a Washer (12) on the Bolt (16).
Slide in the corresponding Bolt (16) through the Seat Adjuster (6) and the Seat
Tube(5).
Now both pieces, the Seat Tube (5) and the Seat Adjuster (6) are linked.
Proceed to add another Washer (12) and a Nylon Nut (15) on the side where the Bolt
is coming out.
Tighten up with a set of wrenches. Turn one side clockwise and hold still from the other
side of the bolt to adjust tightly.
The Seat Adjuster (6) now should be attached to the Seat Tube (5).
Lastly, align the Cushion Pad Protector (24) to the bolt hole on the front side of the seat
tube (5) and secure the piece with a Bolt (23).
A)
B)
C)
D)
E)
F)
G)
H)
INSTRUCTIONS
