Rotate the Main Frame (3) with the Rear Leg (2) assembled in step B once again and
place it on top of the Base Frame (4) and Front Leg (1) as shown in the illustration
above.
Insert the Plastic End Caps (29) for each leg (1) & (2).
E)
F)
Unite the Main Frame (3) to the Base Frame (4) utilizing the Washers (19) and Bolts
(17).
Utilize the Allen Wrench to tighten up the bolts on this step.
A)
B)
(19)
WASHER Ø8
(2 PCS)
(17)
BOLT M8X25
(2 PCS)
BASE
FRAME
(4)
(4)
MAIN
FRAME
The following parts are needed in this step.
INSTRUCTIONS
STEP 2: ASSEMBLING THE FRAME & BACK LEG TO
THE FRONT LEG
08
