Flip the Seat Pad (9) upside down and place the Seat Tube (5) on the bottom part of
the seat and align the screwing holes.
Proceed to install the Washers (19) and the Bolts (18) on each corresponding hole
and tighten up using the Allen Wrench provided. Now both the Seat Pad (9) and the
Seat Tube (5) should be screwed tightly together.
A)
B)
INSTRUCTIONS
(9)
SEAT (1 PC)
(5)
SEAT TUBE
(1 PC)
-SEAT
The following parts are needed in this step.
(19)
WASHER Ø8 (4 PCS)
(18)
BOLT M8X20 (4 PCS)
(19)
(18)
(19)
(19)
(18)
(18)
10
