(15)
NYLON NUT M10
(1 PC)
(13)
BOLT M10X100 (1 PC)
(12)
WASHER Ø10 (2 PCS)
WASHER
Ø20XØ16XØ10
(2 PCS)
(12)
(3)
MAIN FRAME
The following parts are needed in this step.
Place the Backseat (10) onto the Main Frame (3). Align the main frame bolt holes to the
holes of the two washers (14) attached to the Backseat (10). The Backseat (10) should
be positioned above the Leg Base with Wheels (2) as shown in the illustration above.
Proceed to install a Washer (12) on the corresponding Bolt (13) for this step.
Slide the Bolt (13) through the holes mentioned on point
B)
.
Install another Washer (12) on the opposite side from point
C)
.
Install the Nylon Nut (15) on the headless side of the Bolt (13).
Proceed to tighten utilizing the two wrenches. Rotating clockwise on one side and
holding firmly on the opposite side of the Bolt (13), in order to facilitate the tightening
process.
A)
B)
C)
D)
E)
F)
INSTRUCTIONS
STEP 6: ASSEMBLING THE BACKREST CUSHION
ONTO THE MAIN FRAME
