29
DE
EN
B
B
E
B
B
D
D
E
B
D
E
4 x
2 x
2 x
Hex 6 mm
•
Have a second person assist you with these steps.
Connecting the cables
•
One person holds the console above the console stands, as shown in the figure.
•
The second personconnects the cable
(CC)
from the console to the cable from the base frame
(CM)
.
•
Carefully insert the console's fixing brackets into the openings of the console stands.
- Make sure not to pinch your fingers!
- Make sure not to pinch the cable!
Fixing the console on the console stands
•
Fasten the console in the console stands from the
side
:
Insert a short bolt
(B)
and a normal washer
(D)
in the boreholes on the left and right side, as shown in
the figure above. Fasten them with the HEX wrench.
•
Fasten the console in the console stands from the
rear
:
Insert a short bolt
(B)
and a spring washer
(E)
in the boreholes on the left and right side, as shown in
the figure above. Fasten them with the HEX wrench.
4.4 FINALIZING THE ASSEMBLING
•
Check the firmness of all screw connections again.
4.3 FIXING AND CONNECTING THE CONSOLE
CC
CM
2L
2R
