28
G
H
C
C
C
G
H
2 x
Hex 5 mm
•
Tighten all individual parts and pre-assembled parts!
•
Check the firmness again before each training session!
•
Have a second person ready to help you.
4. Assembling
B
D
A
A
B
D
A
B
D
2 x
2 x
4 x
Hex 6 mm
The console stands
(2L
and
2R)
are pre-assembled to the base frame
(1)
.
•
Have a second person assist you with this step.
•
One person lifts the left console stand
(2L)
on the base frame
(1)
as shown in the figure.
CAUTION! Make sure not to pinch fingers!
•
Then, fasten the left console stand
(2L)
to the base frame
(1)
with one long hex bolts
(A)
and two
washers
(D)
. Use the provided hex wrench (Allen wrench;
HEX
).
•
Additionally, fasten the console stand
(2L)
with one short hex bolt
(B)
and a washer
(D)
. Insert it from
above, as shown in the figure, and fasten it with the hex wrench.
•
Repeat the above steps for the right console stand
(2R)
.
2L
2R
1
4.2 FIXING THE LOWER COVERS
•
Put the covers
('H' and 'I')
on the lower end of the console stands.
•
Fasten the covers with one cross-head screw each
('C')
. Use the HEX key
.
4.1 RAISING AND FIXING THE CONSOLE STANDS
