SportsArt Fitness C532U, Руководство пользователя

Страница: 37 / 39

36
MAINTENANCE CHECK LIST
Like cars, fitness products require maintenance. Regular maintenance extends the
life of your fitness product, and failure to provide regular maintenance will void your
warranty. Copy the maintenance log sheet and record maintenance work.
1. Check the product for proper operation and user safety. Make sure that pedal
straps, pedals, cranks and other parts are secure and safe for operation. Secure
any loose screws.
2. Use a clean, lint-free towel, dampened with a mixture of Simple Green and water,
to wipe the product clean. Include the display, grips, handrails, and covers. (Do
NOT use cleaners with alcohol, ammonia or other damaging chemicals. Never
spray or pour any liquid directly on the product.)
1. Inspect the power cord (if applicable) and grips for damage.
2. Make sure the pedestal and other parts are secure, and that screws are tight.
3. Use a clean, lint-free towel to wipe the product clean. Take special care to clean
pedals and pedal straps. Inspect seat carriage and seat back operation, if
applicable.
4. On X-Trainers, secure screws on the arms. Inspect arm and remote operation.
Use a clean, lint-free towel to clean the arms and handles.
1. Turn off and unplug the unit (if applicable). Remove the cover. Wait five minutes to
ensure there is no power to the drive board. Vacuum carefully. Avoid bumping
wires or components.
2. Check drive belt for wear. Replace it if there are cracks or damage. (Note:
SportsArt drive belts last a long, long time. Chances are you will not have to
replace a drive belt within the warranty period.) Align pulleys if needed.
Note that product maintenance requirements depend on usage and environment.
This schedule is based on average use. Some products may require maintenance
more often than is suggested here. Please contact the SportsArt Service Department
if you have any questions.
DAILY TASKS
MONTHLY TASKS
HALF-YEARLY TASKS
If you have questions about the operation or safety of a
product, unplug it and place an "Out-of-Service" note on the product.
CAUTION
Use standard safety procedures when accessing electrical parts. For products with
power cords, turn off unit power. Allow capacitors to discharge by waiting five
minutes before disconnecting the power cord from the power socket. After waiting
five minutes, remove covers to access the drive board and other components. For
products without power cords, let the unit sit without use for five minutes before
accessing drive boards and other components.