Sportneer P110M, Руководство пользователя

Страница: 31 / 38

29
Put the safety key on the console and restart the treadmill , the running time will start to accumulate again from
zero.
If you need to check the accumulated running time, please remove the safety key and press for 2.5
seconds , the time window will show the accumulated running time.
2. TO APPLY LUBRICANT TO THE WALKING BOARD
1) Position the walking belt so that it is located on the center of the
walking board.
2) Insert the spray nozzle into the head of the lubricant can.
3) While lifting the side of the walking belt, position the spray
nozzle between the walking belt and the board approximately
10cm from the front of the treadmill. Apply the silicone spray to
the walking board, moving from the front of the treadmill to the
rear. Repeat this on the other side. Spray for approximately 4
seconds on each side.
4) Allow the silicone to 'set' for one minute before using the
treadmill. WARNING: Do not over-lubricate the walking board.
Excessive lubricant should be wiped off with a clean towel.
KM/H
MP H MP H
KM/H
Remov e the safet y key , and pres s P+M buttons to
shif t betwee n Metric and Englis h Unit.